Probe diameter and material: BENTLY330900-70-00 The probe diameter is 8mm, and the coil is encapsulated at the end of the injection molded PPS plastic probe, with a sturdy structure that can resist mechanical damage.
Application scope: This probe is suitable for various mechanical monitoring applications, including radial vibration, axial position measurement, tachometer, and zero speed measurement.
Temperature range: The probe can operate normally within a temperature range of -51 ° C to+177 ° C (-60 ° F to+351 ° F) and is suitable for various environmental conditions.
technical parameter
Linear range: 80 mil (2 mm) high, output value of 200 mV/mil 4.
Frequency response: In the range of 0 to 10 kHz, the frequency response is+0 to -3 decibels, suitable for various mechanical monitoring applications.
Environmental temperature: 0 ° C to 45 ° C (III), incremental scaling factor (ISF) of 7.87 V
(200 mV/mil), gain error of ± 12.5% 2.
Installation and maintenance
Installation method: The preamplifier should be installed floating and electrically insulated from the unit. It is recommended to use a preamplifier protection box for protection.
Cable type: Use three core shielded cables, with a length of up to tens of meters, and the shielding layer should be connected to the instrument ground at a single end in the control room
Many products have not been listed yet. Please contact us for more products If there is any inconsistency
between the product modeland the displayedpicture, the model shall prevail. Please contact us for specific
product pictures, and we will arrange for photos to be taken in the warehouse for confirmation
Technical Team Service Hotline：0591-85299001
